Named after the late Steve Edwards, DCI is proud to offer the DigiTrak® SE™, designed for compatibility with any existing Mark Series remote display and streamlined to feature select technology from both the F2® and Eclipse® locating systems. Easy to use target-in-the box® locating and outstandi


  • Target-in-the-box® locating.
  • Left/right remote steering.
  • Roll offset.
  • Picture-driven menu.
  • Latest 3-D antenna technology.
  • Compatible with 12-kHz DucTrak™ transmitters.


SE™ Specifications

Part Number SER
Frequency 12 kHz
Power Source NiMH battery pack
Battery Life 5—7 hrs (approx.)
Battery Charger 100/240 V AC, 50/60 Hz
Functions Menu Driven
Controls Trigger Switch
Graphic Display LCD
Audio Output Beeper
Depth Range – ST 50 ft (15.2m)
Telemetry Range 1000 ft (305 m)
Telemetry Channels 4 channels
Operating Temperature Range 14°F to 149°F (-10°C to 65°C)
Accuracy ± 5% absolute



Height 11 in. (27.94 cm)
Width 5.5 in. (13.97 cm)
Length 15 in. (38.1 cm)
Weight (with battery) 7.7 lb (3.49 kg)


SE™ Compatible Remote Displays

F Series™ Display

The F Series™ Display (FSD™) lets you see drilling information at the drill and can receive telemetry signals from the SE™, F5®, F2®, Eclipse®, Mark III, and Mark V locating systems. The FSD™ remote display is equipped with externally mounted antenna. Additional antenna options available upon request for increased telemetry range.


SE™ Transmitters

DCI offers several different transmitters for use with the SE™ system. Go to the transmitters page for more information.

The SE™ Locating System is compatible with DCI’s DucTrak™ transmitters, which are used for tracking existing non-metallic ducts.



SE™ Battery Charger

The DCI NiMH battery charger system will power the SE™ receiver for 6 hours before recharging is necessary.


Start typing and press Enter to search

Shopping Cart